WaconiaPole Barns
Large metal building with its wide bay door open

Machine Sheds ยท Waconia Pole Barns

Machine Shed Builders in Waconia, MN

Clear-span storage for tractors, combines and wagons. Get a farm quote.

Machine Sheds across Carver, Hennepin and Wright counties

Get a Free Machine Shed Quote

Tell us the size, what it's for and where the land is. A builder calls you back with a free quote.

  • Free quotes
  • No obligation
  • Shells to finished buildings
  • Site prep included

Fill out the form below for your free quote ๐Ÿ‘‡

Rather talk? Call (952) 260-6285

Machine Sheds

Machine Shed Builders for Waconia, MN

A machine shed has one job: get a combine, a planter or a tractor with a loader out of the weather and back out again without drama. Everything starts with the door. Measure the tallest, widest piece you own, add clearance for the next upgrade, and let that decide the opening, then the truss span and the building around it.

Carver, Wright and McLeod county farms are changing hands and shrinking into acreage, so the same shed is now asked to hold a hay baler, a skid steer and a pickup alongside the original equipment. Clear-span trusses keep the interior free of posts. Sliding or bi-fold doors give the height, and a gravel or concrete floor lets you decide how much to spend where equipment actually sits.

Weathered barn with a metal roof and an old orange tractor on the lawn

What's included

What goes into machine sheds

  • 01

    Door sized to the equipment

    Sliding or bi-fold openings sized to your tallest and widest machine, plus clearance for growth.

  • 02

    Clear-span trusses

    Trusses that span the width without interior posts, so you can maneuver and park wherever you like.

  • 03

    Gravel or concrete floor

    A compacted rock floor for light use, or reinforced concrete under heavy implements and a shop corner.

  • 04

    Wind bracing

    Extra bracing and anchoring for exposed field ground with long open wind exposure.

  • 05

    Lean-to option

    A shed roof along one side for hay, wagons and open storage, engineered for snow that drifts off the main roof.

  • 06

    Power and lighting

    Panel, outlets and bright interior lighting positioned for a work corner and a battery charger.

Building ideas

Machine Sheds: what they can look like

  • Dark metal-sided building with a gable roof on open pasture
  • Very large hangar-style steel building with tall doors
  • Red farm barn beside a steel grain bin under a big sky
  • Inside a long steel farm building with skylights, a center alley and hay
  • Gray steel machine shed with its big door open, grain elevator across the field
  • Inside an empty clear-span machine shed with wood posts and white steel liner

Example photos of the building type.

How it works

How a machine shed job works

  1. 1

    Measure the machines

    List the largest piece, its height with the cab or arm raised, and what else may move in.

  2. 2

    Choose the span

    Width and length are set around turning room, not just parking room.

  3. 3

    Engineer and permit

    Drawings address snow and wind loads, and a farm building may be exempt from the state code but not from setbacks.

  4. 4

    Raise and finish

    Posts, trusses, steel, doors and floor go in before planting or harvest windows close.

Questions

Machine Sheds FAQs

How do wind and snow affect a machine shed?

Large sidewalls and wide door openings catch wind, so bracing and door anchoring matter in open farm ground. On the roof, trusses carry the ground snow load, and a lean-to needs planning for drifting from the taller roof.

What decides the cost of a machine shed?

Width, length and eave height set the steel and truss count, and the large doors add real cost. Floor type and how much site work the lot needs follow.

Does a farm building need a permit?

A building on a working farm may be exempt from the State Building Code, but township and county setbacks and land-use permits still apply. The builder checks what applies to your parcel before drawings are finalized.

Should I choose concrete or gravel?

Gravel is fine for equipment storage and keeps cost down. Concrete suits a shop corner, wash area or heavy loads that rut rock. Some owners pour concrete only in the work bay.

Can I add a shop onto the shed later?

Yes, post frame buildings extend well. Mention future plans in the first conversation so the end wall is framed for expansion and the pad is graded to suit.

Ready to price your machine shed?

Free quotes. Call or fill out the form.